Back to

Mr Muhammed Kamrul Islam

Casual Academic
UNSW Canberra
School of Eng & Tech
E-mail
muhammedkamrul.islam@student.adfa.edu.au
  • Book Chapters | 2019
    Gunturi C; Escobedo JP; Islam MA, 2019, 'Comparative analysis of dynamic impact tests between the charpy v-notch test and the drop tower test', in Characterization of Minerals, Metals, and Materials 2019 (Series title:Minerals, Metals and Materials Series), pp. 553 - 560, http://dx.doi.org/10.1007/978-3-030-05749-7_55
  • Journal articles | 2024
    Das P; Benslimane A; Islam MA; Mondal D; Nazim MS, 2024, 'A thermo-mechanically loaded rotating FGM cylindrical pressure vessels under parabolic changing properties: An analytical and numerical analysis', Heliyon, 10, http://dx.doi.org/10.1016/j.heliyon.2024.e25969
    Journal articles | 2024
    Das P; Islam MA; Mondal D, 2024, 'Analysis of thermomechanical stresses in dual compound thick cylinders under asymmetric loads: An analytical and numerical method', Heliyon, 10, http://dx.doi.org/10.1016/j.heliyon.2024.e24938
    Journal articles | 2023
    Chakraborty D; Arefin P; Bhattacharjee SC; Hasan M; Sarkar R; Das S; Rahman S; Habib MS; Islam S; Jahan F; Ray G; Ferdous J; Farhana F; Islam MA; Mostafa M, 2023, 'Biological activity of Mesua ferrea (Nageswar) seed extracts: An in vitro and in silico study', Informatics in Medicine Unlocked, 36, http://dx.doi.org/10.1016/j.imu.2023.101166
    Journal articles | 2023
    Das P; Islam MA; Mondal D; Nazim MS, 2023, 'Analytical and numerical (FEA) solution for steady-state heat transfer in generic FGM cylinder coated with two layers of isotropic material under convective-radiative boundary conditions', Heliyon, 9, http://dx.doi.org/10.1016/j.heliyon.2023.e21725
    Journal articles | 2023
    Das P; Islam MA; Somadder S; Hasib MA, 2023, 'Analytical and numerical solutions of pressurized thick-walled FGM spheres', Archive of Applied Mechanics, 93, pp. 2781 - 2792, http://dx.doi.org/10.1007/s00419-023-02406-3
    Journal articles | 2023
    Dudul MSH; Mahmud MS; Islam MA, 2023, 'Low-Fidelity Aerodynamic Load Analysis of Helicopter Rotor in Hover', Journal of Aeronautics, Astronautics and Aviation, 55, pp. 159 - 167, http://dx.doi.org/10.6125/JoAAA.202306_55(2).05
    Journal articles | 2023
    Hasan M; Islam MA; Huang Z; Zhao J; Jiang Z, 2023, 'Influence of sintering time on diffusion bonding of WC-10Co and AISI4340 by spark plasma sintering', Materials Science and Technology (United Kingdom), 39, pp. 683 - 693, http://dx.doi.org/10.1080/02670836.2022.2132732
    Journal articles | 2023
    Islam MA; Jawad A; Jahan NA; Hossain MM, 2023, 'Outstanding conversion efficiency of 38.39% from a Perovskite/CIGS tandem PV cell: A synergic optimization through computational modeling', Heliyon, 9, http://dx.doi.org/10.1016/j.heliyon.2023.e20558
    Journal articles | 2023
    Islam MA; Paul R, 2023, 'A lead-free inorganic Cs2TiX6-based heterostructure perovskite solar cell design and performance evaluation', Optical and Quantum Electronics, 55, http://dx.doi.org/10.1007/s11082-023-05238-1
    Journal articles | 2023
    Rahman A; Hasib MA; Islam MA; Alam I; Chanda S, 2023, 'Fabrication and Performance Investigation of Natural-Glass Fiber Hybrid Laminated Composites at Different Stacking Orientations', Journal of Natural Fibers, 20, http://dx.doi.org/10.1080/15440478.2022.2143981
    Journal articles | 2023
    Wang C; Ma X; Ma L; Jiang Z; Hasan M; Islam MA; Kasi AK; Zhao J, 2023, 'A study on the microstructural evolution of copper/aluminum composite strips fabricated by micro flexible rolling', Materials Characterization, 205, http://dx.doi.org/10.1016/j.matchar.2023.113315
    Journal articles | 2023
    Zulkarna-En M; Islam MA; Al-Faruk A; Pranto MRI; Mukut ANMMI, 2023, 'Numerical Analysis of Aerodynamic and Shock Wave Characteristics of Biconvex and Double-Wedge Shape Airfoils for Supersonic Flow', International Journal of Automotive and Mechanical Engineering, 20, pp. 10821 - 10837, http://dx.doi.org/10.15282/ijame.20.4.2023.02.0837
    Journal articles | 2022
    Das P; Islam MA; Somadder S; Hasib MA, 2022, 'Analytical and numerical analysis of functionally graded (FGM) axisymmetric cylinders under thermo-mechanical loadings', Materials Today Communications, 33, http://dx.doi.org/10.1016/j.mtcomm.2022.104405
    Journal articles | 2022
    Islam MA; Hasib MA; Hasan M; Talapatra S, 2022, 'Deformation Behaviour and Mechanical Response of Closed-cell Cellular Materials under Projectile Impact Using Various Shapes Impactors', International Journal of Automotive and Mechanical Engineering, 19, pp. 9982 - 9992, http://dx.doi.org/10.15282/IJAME.19.3.2022.10.0770
    Journal articles | 2022
    Islam MK; Wang H; Hazell PJ; Kader MA; Escobedo JP, 2022, 'Quasi-static response of horse hoof inspired biomimetic structures', Materials Today: Proceedings, 59, pp. 1168 - 1173, http://dx.doi.org/10.1016/j.matpr.2022.03.185
    Journal articles | 2021
    Islam MK; Hazell PJ; Escobedo JP; Wang H, 2021, 'Biomimetic armour design strategies for additive manufacturing: A review', Materials and Design, 205, http://dx.doi.org/10.1016/j.matdes.2021.109730
    Journal articles | 2021
    Kader MA; Hazell PJ; Islam MA; Ahmed S; Hossain MM; Escobedo JP; Saadatfar M, 2021, 'Strain-rate dependency and impact dynamics of closed-cell aluminium foams', Materials Science and Engineering: A, 818, http://dx.doi.org/10.1016/j.msea.2021.141379
    Journal articles | 2021
    Raja DR; Hredoy MSN; Islam MK; Islam KMA; Adnan MSG, 2021, 'Spatial distribution of heatwave vulnerability in a coastal city of Bangladesh', Environmental Challenges, 4, http://dx.doi.org/10.1016/j.envc.2021.100122
    Journal articles | 2020
    Islam MA; Kader MA; Hazell PJ; Escobedo JP; Brown AD; Saadatfar M, 2020, 'Effects of impactor shape on the deformation and energy absorption of closed cell aluminium foams under low velocity impact', Materials and Design, 191, http://dx.doi.org/10.1016/j.matdes.2020.108599
    Journal articles | 2010
    Islam MA; Ahmed SF, 2010, 'Homogeneous bubbles during jet impingement quenching', American Journal of Applied Sciences, 7, pp. 756 - 762, http://dx.doi.org/10.3844/ajassp.2010.756.762
    Journal articles | 2008
    Islam MA; Monde M; Woodfield PL; Mitsutake Y, 2008, 'Jet impingement quenching phenomena for hot surfaces well above the limiting temperature for solid-liquid contact', International Journal of Heat and Mass Transfer, 51, pp. 1226 - 1237, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2007.01.059
    Journal articles | 2007
    Islam MA; Monde M; Woodfield PL; Mitsutake Y; Mozumder AK, 2007, 'Jet impingement boiling in hot surfaces well above the limiting temperature for solid-liquid contact', Multiphase Science and Technology, 19, pp. 167 - 181, http://dx.doi.org/10.1615/MultScienTechn.v19.i2.40
    Journal articles | 2006
    Mozumder AK; Monde M; Woodfield PL; Islam MA, 2006, 'Maximum heat flux in relation to quenching of a high temperature surface with liquid jet impingement', International Journal of Heat and Mass Transfer, 49, pp. 2877 - 2888, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2006.01.048
    Journal articles | 2005
    Islam MA; Monde M; Mitsutake Y, 2005, 'CHF characteristics and correlations of concentric-tube open thermosyphon working with R22', International Journal of Heat and Mass Transfer, 48, pp. 4615 - 4622, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2005.03.033
    Journal articles | 2005
    Rashid Sarkar MA; Zaidul Islam M; Islam MA, 2005, 'Heat transfer in turbulent flow through tube with wire-coil inserts', Journal of Enhanced Heat Transfer, 12, pp. 385 - 394, http://dx.doi.org/10.1615/JEnhHeatTransf.v12.i4.70
    Journal articles | 1998
    Hasan MZ; Monde M; Mitsutake Y; Islam MA, 1998, 'Design window for shield thermal energy storage for pulsed tokamak fusion reactors', Fusion Engineering and Design, 41, pp. 547 - 554, http://dx.doi.org/10.1016/S0920-3796(98)00377-9
    Journal articles | 1998
    Islam MA; Monde M; Hasan MZ; Mitsutake Y, 1998, 'Experimental study of critical heat flux in concentric-tube open thermosyphon', International Journal of Heat and Mass Transfer, 41, pp. 3691 - 3704, http://dx.doi.org/10.1016/S0017-9310(98)00149-5
  • Conference Papers | 2022
    Islam MA; Jahan NA; Hossain MM, 2022, 'A Lead-Free All-Inorganic CS2SnI6Based Ultra-Thin Perovskite Solar Cell Optimized using SCAPS-1D Simulator', in Proceedings of the 2022 International Conference and Utility Exhibition on Energy, Environment and Climate Change, ICUE 2022, http://dx.doi.org/10.1109/ICUE55325.2022.10113516
    Conference Papers | 2021
    Biswas M; Nova AJ; Mahbub MK; Chaki S; Ahmed S; Islam MA, 2021, 'Stock Market Prediction: A Survey and Evaluation', in 2021 International Conference on Science and Contemporary Technologies, ICSCT 2021, http://dx.doi.org/10.1109/ICSCT53883.2021.9642681
    Conference Papers | 2021
    Biswas M; Shome A; Islam MA; Nova AJ; Ahmed S, 2021, 'Predicting stock market price: A logical strategy using deep learning', in ISCAIE 2021 - IEEE 11th Symposium on Computer Applications and Industrial Electronics, pp. 218 - 223, http://dx.doi.org/10.1109/ISCAIE51753.2021.9431817
    Conference Papers | 2021
    Islam MA; Hasan M; Mahbub Hasan SM; Roy H, 2021, 'Finite Element Prediction of Deformation of Closed-cell Cellular Materials for Sustainable Materials Characterisation', in 2021 International Conference on Science and Contemporary Technologies, ICSCT 2021, http://dx.doi.org/10.1109/ICSCT53883.2021.9642572
    Conference Papers | 2018
    Islam MA; Hossen MB; Banik B; Ghosh BC, 2018, 'Field oriented space vector pulse width modulation control of permanent magnet brushless DC motor', in 5th IEEE Region 10 Humanitarian Technology Conference 2017, R10-HTC 2017, pp. 322 - 327, http://dx.doi.org/10.1109/R10-HTC.2017.8288966
    Conference Papers | 2017
    Akter FN; Islam MK; Begum NN, 2017, 'Fabrication and performance analysis of a low cost parabolic type solar cooker', in AIP Conference Proceedings, AMER INST PHYSICS, Bangladesh Univ Engn & Technol, Dhaka, BANGLADESH, presented at 7th Bangladesh-Society-of-Mechanical-Engineers (BSME) International Conference on Thermal Engineering (ICTE), Bangladesh Univ Engn & Technol, Dhaka, BANGLADESH, 22 December 2016 - 24 December 2016, http://dx.doi.org/10.1063/1.4984682
    Conference Papers | 2017
    Islam MA; Hossen MB; Hasan MS; Ghosh BC, 2017, 'Field oriented rectangular current regulated PWM control of permanent magnet brushless DC motor', in 4th International Conference on Advances in Electrical Engineering, ICAEE 2017, pp. 346 - 351, http://dx.doi.org/10.1109/ICAEE.2017.8255379
    Conference Papers | 2016
    Sarker MSZ; Hossain M; Hossain N; Rasheduzzaman M; Islam MA, 2016, 'Area optimization in 8T SRAM cell for low power consumption', in ICEEE 2015 - 1st International Conference on Electrical and Electronic Engineering, pp. 117 - 120, http://dx.doi.org/10.1109/CEEE.2015.7428233
    Conference Papers | 2015
    Islam AKMN; Islam MA; Saha M, 2015, 'Experimental investigation of transient heat transfer on a solid surface, with fire retardant fabric under hot air impinging jet', in Procedia Engineering, pp. 167 - 175, http://dx.doi.org/10.1016/j.proeng.2015.05.053
    Conference Papers | 2015
    Islam MA; Arafath MY; Hasan MJ, 2015, 'Design of DDR4 SDRAM controller', in 8th International Conference on Electrical and Computer Engineering: Advancing Technology for a Better Tomorrow, ICECE 2014, pp. 148 - 151, http://dx.doi.org/10.1109/ICECE.2014.7026950
    Conference Papers | 2013
    Rezwan AA; Hossain S; Islam MA, 2013, 'Study of thermal response of a skin stimulant material with a protective fabric under a hot air jet', in Procedia Engineering, pp. 112 - 117, http://dx.doi.org/10.1016/j.proeng.2013.03.096
    Conference Papers | 2013
    Rezwan AA; Hossain S; Rahman SMA; Islam MA, 2013, 'Heat transfer enhancement in an air process heater using semi-circular hollow baffles', in Procedia Engineering, pp. 357 - 362, http://dx.doi.org/10.1016/j.proeng.2013.03.132